Home > Vibration Test Table >

Laboratory Fully Automated Vibration Table System For Simplifies The Testing Process With An Intuitive Interface

Product Categories

Three Zone Thermal Shock Chamber [3]
Vibration Test Table [65]
Shock Test System [7]
Two Zone Thermal Shock Chamber [7]
Constant Temperature And Humidity Test Chamber [15]
Walk In Environmental Test Chamber [22]
Battery Test Equipment [18]
Agree Chamber [20]
Altitude Test Chamber [12]
Environmental Stress Screening Chamber [10]
High Temperature Aging Chamber [6]
Power Amplifier [6]
Vibration Controller [7]
Slip Table [6]
Head Expander [6]
Salt Spray Test Chamber [6]
Rain Test Chamber [6]
Dust Test Chamber [7]
Xenon Test Chamber [7]

Guangdong Jianqiao Testing Equipment Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Laboratory Fully Automated Vibration Table System For Simplifies The Testing Process With An Intuitive Interface

Ask Lasest Price
Brand Name :	Jianqiao
Model Number :	JQA-202-335
Certification :	CE
Supply Ability :	300 sets

Add to Cart

Product Details
Company Profile

Laboratory Fully Automated Vibration Table System For Simplifies The Testing Process With An Intuitive Interface

Fully Automated Vibration Table System For Simplifies The Testing Process With An Intuitive Interface, Increasing Laboratory Productivity

Frequency Range

Electrodynamic shakers operate through a wide frequency range that is typically from 5 Hz to 3,000 Hz. Most test specifications in the automotive and transportation industry emphasize low frequencies (ie: below 1,000 Hz) while military vibration specifications normally call for testing out to 2,000Hz and electronics industry specs can go as high as 3,000 Hz.

Armature

A lightweight armature is favorable and will permit testing at higher g levels.

• The armature structure should provide a significant amount of stiffness.

• Material of construction is often magnesium or aluminum.

• Magnesium has a very high strength-to-weight ratio and provides superior damping, making it a favored material.

• Smaller lighter armatures may be appropriate for testing smaller products, while larger armatures can eliminate the need to use a head expander, reducing system mass and improving transmissibility.

Centering & Support

The armature needs to remain centered in its travel. Using an optical sensor to locate the armature and an automated pneumatic fill & drain system, the armature, bare table or loaded, will stay true to its course. Merely centering the armature at the beginning of a test is neither adequate nor safe. Advanced systems possess the ability to continuously center the armature while a test is in progress. Another feature of most shakers is a centerpole and bearing shaft that helps to keep the armature properly aligned during operation. It is good practice to load fixture and product weight overthe center of the armature to avoidoverturning moments. In the event the payload center of gravity cannot be located over the centerof the armature, additional guidance may need to be added to thesystem to prevent shaker damage.

Head Expanders & Plates

If large or multiple products extend too far beyond the edge of the armature, the product could be damaged or overtested. Using a head expander or head plate to increase the armature mounting area and properly tie the fixturing and products should alleviate this potential problem. Head expanders and plates should be designed for proper stiffness (ie: gusseted and welded) and should not be bolt-together structures since bolted joints reduce energy transmission. Favored materials of construction are magnesium or aluminum.

Fixturing

In addition to acting as a mounting interface between the shaker and the product to be tested, a vibration fixture needs to be rigid and lightweight. The vibration fixture should also transmit a uniform distribution of energy from the armature to the test item. In many cases, vibration is applied in three orthogonal axes. Specialized vibration fixture designs permit the fixture to be rotated for testing in the X, Y, and Z axis. It is common to find the weight of a fixture to be two to three times heavier than the products to be tested. Fixtures should mount easily to the armature and products should mount easily to the fixture. Quick changes from product to product and axis to axis help to maximize equipment utilization and improve lab productivity.

Slip tables

A sliptable assembly is used when vibration is required in the horizontal axis. For this purpose, the shaker is mounted in a trunnion which allows the shaker to be rotated 90°. A single piece table construction with a solid trunnion limits the relative body motion of the shaker and improves low frequency/high displacement performance of the overall system by solidly linking all of the reaction mass of the shaker to the slip table base. The solid trunnion and base configuration also limits the potential problems associated with misalignment which can plague a two piece system. Beyond the standard oil film systems, several options such as guideline tracking and hydrostatic bearings,are available to further control true and consistent horizontal vibration performance.

Cooling

Shakers consume significant electrical power which is converted to heat. Cooling of field coils and armature coils is mandatory in an electrodynamic vibration system. Shakers up to 15,000 lbf are typically air-cooled, while high force shakers (20,000 lbf and above) are liquid-cooled. Air-cooled shakers can be set up to exhaust warm air outside the facility during warm months.

Provisions can be made to damper the warm air back into the facility during colder months. The blower for an air-cooled shaker can be mounted outdoors or it can be placed in a sound deadening package and remain indoors.

Chamber Interface

When integrated with a chamber to perform combined environment tests, the shaker needs to be equipped with certain items. A thermal barrier, using sheets of G10 material and/or flexible silicon rubber will protect the shaker from being exposed to the temperature extremes of the test chamber. Properly designed, this flexible seal will also provide a protective barrier against moisture. Casters and track are one way to roll the shaker under a chamber. Another option is to utilize an air-glide system that floats the shaker on a cushion of compressed air.Applications where the shaker remains fixed in its position and the chamber rolls back and forth present another viable option.The ability to generate and run sophisticated combined environment tests from a single user interface can be a huge advantage.This simplifies data entry and synchronizes the individual pieces of equipment so they work in concert to carry out a fully integrated test.

Vibration Isolation

Electrodynamic shakers are capable of generating high forces over a wide range of frequencies. To limit the amount of unwanted vibration energy from being transmitted into the floor and throughout the facility, pneumatic mounts between the shaker and the floor are filled with compressed air to isolate the transmission of this energy. Shakers are relatively heavy pieces of equipment and, as such, are typically mounted on the ground floor of the facility

Noise Levels

An electrodynamic shaker running a full force random profile can be as loud as a jet engine. While performing a sine sweep to find a resonance point, the shaker can start out as a low-pitched hum and rise to an ear piercing scream. It is for these reasons that a sound enclosure should house the shaker system. It is a wise idea to place the control and amplifier console outside of the room for purposes of safety and comfort. A multi-pane window providing a view from the control room into the shaker room is advised for those situations where visual access to the product

under test is critical.

Laboratory Fully Automated Vibration Table System For Simplifies The Testing Process With An Intuitive Interface

Guangdong Jianqiao Testing Equipment Co.,Ltd is a large scale professional manufacturer specializing in R&D ,production and sales of vibration test system,environmental test chamber and battery testing equipment.With the advantage in Technicians in R&D department,professional production and sales teamand perfect after-service department.and several ,senior R&D Engineer haired across the country .Our marketing network covers major large and medium-sized cities among the country. In the past 20 years, Jianqiao provide high quality products and one -stop solutions for dozens of top 100 enterprises and 11289 end users.

The company manufactures all kinds of vibration and environmental testing equipment in strict accordingwith ISO9001 and products meet the standard of ISO, ASTM , DIN ,EN , BS , UL , JIS , GB/T , GJB,JIS,ANIS,UL,IEC etc. and other domestic and international standards .Our products are widely used in New energy vehicles, aerospace, - shipping, electronics industry and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields.

Laboratory Fully Automated Vibration Table System For Simplifies The Testing Process With An Intuitive Interface

Product Tags:


*From:	Your email address is incorrect!
*To:	Guangdong Jianqiao Testing Equipment Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Vibration Test Table products from this supplier

Find Similar Products By Category:

Consumer Electronics

Hot Searches:

Guangdong Jianqiao Testing Equipment Co., Ltd.

Laboratory Fully Automated Vibration Table System For Simplifies The Testing Process With An Intuitive Interface

Laboratory Fully Automated Vibration Table System For Simplifies The Testing Process With An Intuitive Interface

Laboratory Fully Automated Vibration Table System For Simplifies The Testing Process With An Intuitive Interface

fully automated vibration test table

vibration table system with intuitive interface

laboratory vibration table for testing

Laboratory Fully Automated Vibration Table System For Simplifies The Testing Process With An Intuitive Interface